In recent years, you will find that the street light poles on both sides of the road are not the same as other street light poles in the urban area. It turns out that they are all in one street light “taking on multiple roles”, some are equipped with signal lights, and some are equipped with cameras. , and some installed traffic signs.
In the process of promoting “integration of multiple poles”, all kinds of poles along the qualified roads will be integrated in accordance with the principle of “combining if possible”.
In the past, there were various street light poles, traffic probes, signal lights, signs, etc. on the road, which affected the beauty of the environment; in addition, due to the different setting standards and lack of coordination, the phenomenon of repeated construction was serious, which blocked the line of sight and affected driving safety. And other hidden dangers, bring a lot of inconvenience to the public. After the birth of all in one street light, various facilities such as lighting facilities, traffic signs, and “electronic police” were combined and built on one pole body, which minimized the ground ancillary facilities, avoided multiple excavations of the road, and could also save space and improve Urban landscape, achieve “one-time construction, long-term benefit”.
All in one street light features
1. Integrated design, simple, fashionable, portable and practical;
2. Use solar power to save electricity and protect the earth’s resources;
3. Use lithium iron phosphate battery to ensure the service life of the product;
4. No need to pull the wire, the installation is extremely convenient;
5. Waterproof structure, safe and reliable;
6. Modular design concept, easy to install, maintain and repair;
7. Aluminum alloy material as the main structure has good anti-rust and anti-corrosion functions.
All in one street light installation precautions
1. When installing the lamps, try to handle them with care. Collision and knocking are strictly prohibited to avoid damage.
2. In front of the solar panel, there should be no tall buildings or trees that can block the sunlight, and choose an unshaded place for installation.
3. All the screws to install the lamps must be tightened and the locknuts must be tightened, and there must be no looseness or shaking.
4. When replacing internal components, wiring must be strictly in accordance with the corresponding wiring diagram. The positive and negative poles should be distinguished, and reverse connection is strictly prohibited.
If you are interested in solar led street light, welcome to contact solar led street light manufacturer TIANXIANG to read more.
Post time: Mar-30-2023