Converting municipal streetlights to solar LED roadway lamps

Solar LED road lamps are now common on many roads, and some have been converted from municipal streetlights. It’s totally possible to switch from municipal streetlights to solar LED road lamps. “How can I easily install solar LED streetlights?” is a question that many clients have. “My previous streetlight poles were powered by municipal electricity.” Today, we’ll discuss a quick method for converting municipal streetlights to solar LED roadway lamps.

Even though many customers wish to install solar LED roadway lamps, they are reluctant to replace their existing streetlight poles. This is particularly common in towns and counties where poles that have been in use for seven or eight years are neither new nor old; discarding them as scrap metal would be wasteful and regrettable. The old poles do not need to be taken down in order to install a solar system.

Many people might be surprised by the transformation of regular streetlights into solar LED roadway lamps, so let me explain.

A comparison of regular streetlights and solar LED roadway lamps reveals structural similarities between the two. The only difference is that solar LED road lamps come with an additional solar panel frame. Things are easier when you know this. Just measure the top of the existing streetlight pole (the upper portion of the pole) to construct a solar panel frame that satisfies the same specifications. Following the construction of the frame, the solar panels must be installed, the battery must be positioned in a pit underneath the pole, and LED lights must be used in place of the existing light source (if the current lights are LED, this is not necessary). After these processes are completed, the modification is essentially successful. The section that offers a thorough explanation of the debugging procedure for solar streetlight controllers is a good place to look if you have any questions.

By eliminating a great deal of unnecessary spending, retrofitting solar streetlights can significantly reduce project costs. First off, the cost of installation and transportation is reduced because new poles don’t need to be bought. Since fewer products are produced, pollution is decreased, making this strategy in and of itself environmentally benign and energy-efficient. We recommend that the best way for customers who wish to switch to solar streetlights is to modify the current light poles.

Advantages and Safety Measures

Considerable Energy Savings: The solar system uses no electricity, and LED light sources use over 75% less energy than conventional high-pressure sodium lamps.

Intelligent Management: Remote monitoring, fault alerts, and other features can be integrated into contemporary solar LED road lamps to accomplish intelligent management.

Broad Applicability: In rural areas, parks, and small roads where power supply is challenging and wiring costs are high, the benefits of this upgrade are especially noticeable.

Direct sales of solar LED road lamps are offered by the manufacturer TIANXIANG, which also stocks a wide variety of accessories. Durability and reasonable costs are guaranteed by stringent quality control. Customization and large purchases are accepted. We genuinely welcome collaboration, conduct business with honesty, and supply you with long-term, high-performing lighting options.